Slayer Espresso · Espresso machine · Commercial
Slayer Steam EP 2 Group
Slayer's 2-group volumetric workhorse for high-volume cafés, built around individual PID-controlled 1.7 l brew tanks and a 7.4 l steam tank. Shots run at 9 bar after a programmable pre-wet and pause phase, with up to four volumetric doses per group set from a single central dashboard. Electronic steam valves and a low, deep drip tray are aimed at busy service rather than manual profiling.
AutomaticMulti-boiler boiler2 groupsPID
- Status
- In production
- Also known as
- SLAYER Steam EP 2-Group
- Made in
- United States
Record coverage 60%
16 sourced8 derived15 not published
Specification
Dimensions
| Field | Value | Evidence |
|---|---|---|
| Width89 cm on OEM page x 10 (measurements exclude portafilters, actuators, cup rails) | 890mm 35.0 in | Derivedslayerespresso.com |
| Depth71 cm on OEM page x 10 | 710mm 28.0 in | Derivedslayerespresso.com |
| Height43.2 cm on OEM page x 10 | 432mm 17.0 in | Derivedslayerespresso.com |
| WeightOEM spec table | 100kg 220 lb | Sourcedslayerespresso.com |
Boilers and heat
| Field | Value | Evidence |
|---|---|---|
| Boiler system2 x 1.7 l brew tanks (600 W each) + 7.4 l steam tank (3500 W) | Multi-boiler | Sourcedslayerespresso.com |
| Boilers2 x 1.7 l brew tanks (600 W each) + 7.4 l steam tank (3500 W) | 3 | Sourcedslayerespresso.com |
| Boiler volumesum of 2 x 1.7 l brew tanks (600 W each) + 7.4 l steam tank (3500 W) | 10.8L 2.9 US gal | Derivedslayerespresso.com |
| PID temperature controlindividual brew tanks with PID control | Yes | Sourcedslayerespresso.com |
Pump and group
| Field | Value | Evidence |
|---|---|---|
| Brew pressureOEM: 9-bar extraction with pre-wet | 9bar 131 psi | Sourcedslayerespresso.com |
| Pressure profilingprogrammable 0-4 s pre-wet and pause phases before full extraction | Preinfusion | Sourcedslayerespresso.com |
| Pre-infusionprogrammable pre-wet phase | Yes | Sourcedslayerespresso.com |
| GroupsOEM spec-table column | 2 | Sourcedslayerespresso.com |
Water and steam
| Field | Value | Evidence |
|---|---|---|
| Water sourceOEM Steam Single page states an internal reservoir is a first for a Slayer, so this model is plumbed | Plumbed | Derivedslayerespresso.com |
| PlumbingOEM: cantilevered wings hide power and drain cables | Inlet and drain | Derivedslayerespresso.com |
| Milk systemsteam wands with electronic valves | Manual wand | Sourcedslayerespresso.com |
Electrical
| Field | Value | Evidence |
|---|---|---|
| Voltagesingle-phase 220-240 V 50/60 Hz; three-phase 380-415 V 50/60 Hz | 220V | Sourcedslayerespresso.com |
| Currentsingle-phase 21-23 A; three-phase 13-14 A | 21A | Sourcedslayerespresso.com |
| Powersingle-phase 4.7-5.6 kW over 220-240 V; three-phase 4.9-5.7 kW | 4,700W | Sourcedslayerespresso.com |
| Heating elementsum of element ratings: 2 x 1.7 l brew tanks (600 W each) + 7.4 l steam tank (3500 W) | 4.7kW | Derivedslayerespresso.com |
| Phasesingle-phase 220-240 V standard; three-phase 380-415 V version listed | Single | Sourcedslayerespresso.com |
Features and price
| Field | Value | Evidence |
|---|---|---|
| Typepush-button volumetric output, up to four programmed doses per group | Automatic | Sourcedslayerespresso.com |
| Built-in grinderno grinder among the OEM-listed components | No | Derivedslayerespresso.com |
| Colourscustomisable panels, wood and metal finishes | Anodized aluminum panels, Matte black panels | Sourcedslayerespresso.com |
| Made inOEM About page: designs and manufactures its machines, 'designed & crafted in Seattle USA'; headquarters Renton, WA | United States | Sourcedslayerespresso.com |
Not published Cup clearance, Boiler material, Warm-up, Pump, Group, Portafilter, Reservoir, Steam wand, Hot-water tap, NSF listed, ENERGY STAR, Display, Shot timer, Output, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
