Slayer Espresso · Espresso machine · Commercial
Slayer Espresso V3 2 Group
Slayer's flagship 2-group flow-control machine for specialty cafés: each group has its own 1.7 l brew tank fed by a pre-heat tank, with a separate 7.4 l steam tank. Extraction is shaped by a needle valve behind a three-position actuator, which lets the barista run a restricted-flow pre-brew phase before full flow; a programmable pre-brew timer makes that phase repeatable. Body panels, X-frames and wood actuators are made to order.
Semi-automaticMulti-boiler boiler2 groups
- Status
- In production
- Also known as
- Slayer Espresso v3 2-Group · SLAYER Espresso 2 group
- Made in
- United States
Record coverage 53%
13 sourced8 derived18 not published
Specification
Dimensions
| Field | Value | Evidence |
|---|---|---|
| Width77.5 cm on OEM page x 10 (measurements exclude portafilters, actuators, cup rails) | 775mm 30.5 in | Derivedslayerespresso.com |
| Depth67.5 cm on OEM page x 10 | 675mm 26.6 in | Derivedslayerespresso.com |
| Height43.5 cm on OEM page x 10 | 435mm 17.1 in | Derivedslayerespresso.com |
| WeightOEM spec table | 100kg 220 lb | Sourcedslayerespresso.com |
Boilers and heat
| Field | Value | Evidence |
|---|---|---|
| Boiler system2 x 1.7 l brew tanks (600 W each) + 3.3 l pre-heat tank (1000 W) + 7.4 l steam tank (3500 W) | Multi-boiler | Sourcedslayerespresso.com |
| Boilers2 x 1.7 l brew tanks (600 W each) + 3.3 l pre-heat tank (1000 W) + 7.4 l steam tank (3500 W) | 4 | Sourcedslayerespresso.com |
| Boiler volumesum of 2 x 1.7 l brew tanks (600 W each) + 3.3 l pre-heat tank (1000 W) + 7.4 l steam tank (3500 W) | 14.1L 3.7 US gal | Derivedslayerespresso.com |
Pump and group
| Field | Value | Evidence |
|---|---|---|
| Pressure profilingpatented needle valve restricts flow rate; 3-position actuator shifts between flow rates | Flow control | Sourcedslayerespresso.com |
| Pre-infusionprogrammable pre-brew timer toggles between pre-brew and full flow | Yes | Sourcedslayerespresso.com |
| GroupsOEM spec-table column | 2 | Sourcedslayerespresso.com |
Water and steam
| Field | Value | Evidence |
|---|---|---|
| Water sourceOEM Steam Single page states an internal reservoir is a first for a Slayer, so this model is plumbed | Plumbed | Derivedslayerespresso.com |
| Milk systemdedicated steam tank; wand type not described | Manual wand | Derivedslayerespresso.com |
Electrical
| Field | Value | Evidence |
|---|---|---|
| Voltagesingle-phase 220-240 V 50/60 Hz; three-phase 380-415 V 50/60 Hz | 220V | Sourcedslayerespresso.com |
| Currentsingle-phase 26-29 A; three-phase 17-18 A | 26A | Sourcedslayerespresso.com |
| Powersingle-phase 5.7-6.9 kW over 220-240 V; three-phase 6.3-7.5 kW | 5,700W | Sourcedslayerespresso.com |
| Heating elementsum of element ratings: 2 x 1.7 l brew tanks (600 W each) + 3.3 l pre-heat tank (1000 W) + 7.4 l steam tank (3500 W) | 5.7kW | Derivedslayerespresso.com |
| Phasesingle-phase 220-240 V standard; three-phase 380-415 V version listed | Single | Sourcedslayerespresso.com |
Features and price
| Field | Value | Evidence |
|---|---|---|
| Typemanual 3-position brew actuator with programmable pre-brew timer; no volumetric dosing listed | Semi-automatic | Sourcedslayerespresso.com |
| Built-in grinderno grinder among the OEM-listed components | No | Derivedslayerespresso.com |
| Colourscustomisable panels, wood and metal finishes | Standard: silver powder-coated X-frames, black rear and side panels, European Ash actuators | Sourcedslayerespresso.com |
| Made inOEM About page: designs and manufactures its machines, 'designed & crafted in Seattle USA'; headquarters Renton, WA | United States | Sourcedslayerespresso.com |
Not published Cup clearance, Boiler material, PID temperature control, Warm-up, Pump, Brew pressure, Group, Portafilter, Reservoir, Plumbing, Steam wand, Hot-water tap, NSF listed, ENERGY STAR, Display, Shot timer, Output, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
