Slayer Espresso · Espresso machine · Commercial
Slayer Espresso V3 3 Group
Slayer's flagship 3-group flow-control machine for specialty cafés: each group has its own 1.7 l brew tank fed by a pre-heat tank, with a separate 12 l steam tank. Extraction is shaped by a needle valve behind a three-position actuator, which lets the barista run a restricted-flow pre-brew phase before full flow; a programmable pre-brew timer makes that phase repeatable. Body panels, X-frames and wood actuators are made to order.
Semi-automaticMulti-boiler boiler3 groups
- Status
- In production
- Also known as
- Slayer Espresso v3 3-Group · SLAYER Espresso 3 group
- Made in
- United States
Record coverage 53%
13 sourced8 derived18 not published
Specification
Dimensions
| Field | Value | Evidence |
|---|---|---|
| Width103 cm on OEM page x 10 (measurements exclude portafilters, actuators, cup rails) | 1,030mm 40.6 in | Derivedslayerespresso.com |
| Depth67.5 cm on OEM page x 10 | 675mm 26.6 in | Derivedslayerespresso.com |
| Height43.5 cm on OEM page x 10 | 435mm 17.1 in | Derivedslayerespresso.com |
| WeightOEM spec table | 139kg 306 lb | Sourcedslayerespresso.com |
Boilers and heat
| Field | Value | Evidence |
|---|---|---|
| Boiler system3 x 1.7 l brew tanks (600 W each) + 5.4 l pre-heat tank (1000 W) + 12 l steam tank (4500 W) | Multi-boiler | Sourcedslayerespresso.com |
| Boilers3 x 1.7 l brew tanks (600 W each) + 5.4 l pre-heat tank (1000 W) + 12 l steam tank (4500 W) | 5 | Sourcedslayerespresso.com |
| Boiler volumesum of 3 x 1.7 l brew tanks (600 W each) + 5.4 l pre-heat tank (1000 W) + 12 l steam tank (4500 W) | 22.5L 5.9 US gal | Derivedslayerespresso.com |
Pump and group
| Field | Value | Evidence |
|---|---|---|
| Pressure profilingpatented needle valve restricts flow rate; 3-position actuator shifts between flow rates | Flow control | Sourcedslayerespresso.com |
| Pre-infusionprogrammable pre-brew timer toggles between pre-brew and full flow | Yes | Sourcedslayerespresso.com |
| GroupsOEM spec-table column | 3 | Sourcedslayerespresso.com |
Water and steam
| Field | Value | Evidence |
|---|---|---|
| Water sourceOEM Steam Single page states an internal reservoir is a first for a Slayer, so this model is plumbed | Plumbed | Derivedslayerespresso.com |
| Milk systemdedicated steam tank; wand type not described | Manual wand | Derivedslayerespresso.com |
Electrical
| Field | Value | Evidence |
|---|---|---|
| Voltagesingle-phase 220-240 V 50/60 Hz; three-phase 380-415 V 50/60 Hz | 220V | Sourcedslayerespresso.com |
| Currentsingle-phase 33-36 A; three-phase 19-21 A | 33A | Sourcedslayerespresso.com |
| Powersingle-phase 7.3-8.7 kW over 220-240 V; three-phase 7.3-8.7 kW | 7,300W | Sourcedslayerespresso.com |
| Heating elementsum of element ratings: 3 x 1.7 l brew tanks (600 W each) + 5.4 l pre-heat tank (1000 W) + 12 l steam tank (4500 W) | 7.3kW | Derivedslayerespresso.com |
| Phasesingle-phase 220-240 V standard; three-phase 380-415 V version listed | Single | Sourcedslayerespresso.com |
Features and price
| Field | Value | Evidence |
|---|---|---|
| Typemanual 3-position brew actuator with programmable pre-brew timer; no volumetric dosing listed | Semi-automatic | Sourcedslayerespresso.com |
| Built-in grinderno grinder among the OEM-listed components | No | Derivedslayerespresso.com |
| Colourscustomisable panels, wood and metal finishes | Standard: silver powder-coated X-frames, black rear and side panels, European Ash actuators | Sourcedslayerespresso.com |
| Made inOEM About page: designs and manufactures its machines, 'designed & crafted in Seattle USA'; headquarters Renton, WA | United States | Sourcedslayerespresso.com |
Not published Cup clearance, Boiler material, PID temperature control, Warm-up, Pump, Brew pressure, Group, Portafilter, Reservoir, Plumbing, Steam wand, Hot-water tap, NSF listed, ENERGY STAR, Display, Shot timer, Output, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
