Profitec · Espresso machine · Prosumer
Profitec Pro 400
A compact heat-exchanger machine with a 1.6 l stainless boiler, vibration pump and a three-position switch for preset boiler temperatures, preinfusion and eco mode. It reads boiler and pump pressure on a dual gauge and suits home baristas wanting simultaneous brewing and steaming in a narrow footprint.
Semi-automaticHeat exchanger boilerVibratory pumpPID
- Status
- In production
- Also known as
- PRO 400 · CM500004
- Made in
- Germany
Record coverage 63%
25 sourced14 not published
Specification
Dimensions
| Field | Value | Evidence |
|---|---|---|
| Widthwithout portafilter | 228mm 9.0 in | Sourcedprofitec-espresso.com |
| Depthwithout portafilter | 448mm 17.6 in | Sourcedprofitec-espresso.com |
| Heightwithout portafilter | 372mm 14.6 in | Sourcedprofitec-espresso.com |
| Weight | 21.5kg 47 lb | Sourcedprofitec-espresso.com |
Boilers and heat
| Field | Value | Evidence |
|---|---|---|
| Boiler system | Heat exchanger | Sourcedprofitec-espresso.com |
| Boilers | 1 | Sourcedprofitec-espresso.com |
| Boiler volume | 1.6L 54 fl oz | Sourcedprofitec-espresso.com |
| Boiler materialstainless steel boiler and heating element | Stainless | Sourcedprofitec-espresso.com |
| PID temperature controlthree PID-controlled boiler temperatures (120/124/128 C) | Yes | Sourcedprofitec-espresso.com |
| Warm-upmanual: approx. 25 min depending on ambient temperature | 25min | Sourcedprofitec-espresso.com |
Pump and group
| Field | Value | Evidence |
|---|---|---|
| Pump | Vibratory | Sourcedprofitec-espresso.com |
| Pressure profilingpreinfusion on/off | Preinfusion | Sourcedprofitec-espresso.com |
| Pre-infusionpreinfusion on/off | Yes | Sourcedprofitec-espresso.com |
| GroupOEM: 'Profitec brew group with stainless steel mushroom'; the About page says Profitec uses its own further-developed brew group after describing the E61 | E61 | Sourcedprofitec-espresso.com |
| Groupssingle group | 1 | Sourcedprofitec-espresso.com |
Water and steam
| Field | Value | Evidence |
|---|---|---|
| Water source2.8 l water tank | Reservoir | Sourcedprofitec-espresso.com |
| ReservoirOEM: approx. 2.8 l water tank | 2.8L 95 fl oz | Sourcedprofitec-espresso.com |
| Hot-water tapsteam and hot water wands | Yes | Sourcedprofitec-espresso.com |
| Milk systemmanual steam wand (steam valve listed in OEM technical data) | Manual wand | Sourcedprofitec-espresso.com |
Electrical
| Field | Value | Evidence |
|---|---|---|
| VoltageUS version per OEM page; EU/UK/CH/AU version 230 V; manual gives a single 1500 W figure | 115V | Sourcedprofitec-espresso.com |
| PowerUS 115 V version (OEM 'power usage'); EU/UK/CH/AU 230 V version 1400 W | 1,500W | Sourcedprofitec-espresso.com |
Features and price
| Field | Value | Evidence |
|---|---|---|
| Type | Semi-automatic | Sourcedprofitec-espresso.com |
| Displaydual gauge for boiler and pump pressure; no display listed | Analogue gauge | Sourcedprofitec-espresso.com |
| Built-in grinderno grinder in the OEM technical data or scope of delivery | No | Sourcedprofitec-espresso.com |
| Made inOEM Handmade page: all espresso machines other than the GO and PRO 300 are made at the headquarters near Heidelberg | Germany | Sourcedprofitec-espresso.com |
Not published Cup clearance, Brew pressure, Portafilter, Plumbing, Steam wand, Current, Heating element, Phase, NSF listed, ENERGY STAR, Shot timer, Output, Colours, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
What the sources say
- Manufactured at Profitec headquarters in Germany (Handmade page: all machines except GO and PRO 300) profitec-espresso.com
