Profitec · Espresso machine · Prosumer

Profitec DRIVE

Profitec's top dual-boiler machine pairs a rotary pump and a 2 l steam boiler with a flow-control valve at the group for adjusting flow during the shot. It can run from its tank or a fixed water line and has PID control of both boilers, preinfusion modes and an OLED display.

Semi-automaticDual boilerRotary pumpPID

Status
In production
Also known as
DRIVE · CM500009
Made in
Germany

Record coverage 73%

28 sourced1 derived10 not published

Profitec DRIVE espresso machine
340 × 485 × 420 mm wide, deep, tall · 13.4 × 19.1 × 16.5 in Image: Profitec · About our images

Specification

Dimensions

FieldValueEvidence
Widthwithout portafilter 340mm 13.4 in Sourcedprofitec-espresso.com
Depthwithout portafilter; product card gives 31.3 kg 485mm 19.1 in Sourcedprofitec-espresso.com
Heightwithout portafilter 420mm 16.5 in Sourcedprofitec-espresso.com
Weight 31kg 68 lb Sourcedprofitec-espresso.com

Boilers and heat

FieldValueEvidence
Boiler systemdual boiler (single-boiler option) Dual Sourcedprofitec-espresso.com
Boilers 2 Sourcedprofitec-espresso.com
Boiler volume0.75 l coffee boiler + 2.0 l steam/hot water boiler 2.75L 93 fl oz Derivedprofitec-espresso.com
Boiler materialboth boilers stainless steel Stainless Sourcedprofitec-espresso.com
PID temperature controlPID for both boilers Yes Sourcedprofitec-espresso.com
Warm-upmanual: approx. 12-13 min with Fast Heating enabled (upper bound recorded) 13min Sourcedprofitec-espresso.com

Pump and group

FieldValueEvidence
Pump Rotary Sourcedprofitec-espresso.com
Brew pressuremanual: extraction runs at 9 bar 9bar 131 psi Sourcedprofitec-espresso.com
Pressure profilingbuilt-in flow profile (Flow Control) valve Flow control Sourcedprofitec-espresso.com
Pre-infusionactive and passive preinfusion Yes Sourcedprofitec-espresso.com
GroupOEM: 'Profitec brew group with stainless steel mushroom'; the About page says Profitec uses its own further-developed brew group after describing the E61 E61 Sourcedprofitec-espresso.com
Groupssingle group 1 Sourcedprofitec-espresso.com

Water and steam

FieldValueEvidence
Water sourceswitchable water tank / fixed water connection Both Sourcedprofitec-espresso.com
ReservoirOEM: approx. 2.8 l water tank 2.8L 95 fl oz Sourcedprofitec-espresso.com
Plumbingfixed water connection (metal hose supplied); a drainage container is supplied, no drain connection stated Inlet Sourcedprofitec-espresso.com
Hot-water tapsteam and hot water boiler Yes Sourcedprofitec-espresso.com
Milk systemmanual steam wand (steam valve listed in OEM technical data) Manual wand Sourcedprofitec-espresso.com

Electrical

FieldValueEvidence
VoltageUS version per OEM page; EU/UK/CH/AU version 230 V; manual lists US/JP 110 V 115V Sourcedprofitec-espresso.com
PowerUS 115 V version (OEM 'power usage'); EU/UK/CH/AU 230 V version 1600 W 1,600W Sourcedprofitec-espresso.com

Features and price

FieldValueEvidence
Type Semi-automatic Sourcedprofitec-espresso.com
DisplayOLED display (enum has no OLED value) LCD Sourcedprofitec-espresso.com
Shot timerbrewing time in seconds Yes Sourcedprofitec-espresso.com
Built-in grinderno grinder in the OEM technical data or scope of delivery No Sourcedprofitec-espresso.com
Coloursitems CM500009-00 and CM500009-02 Stainless steel, Matt black Sourcedprofitec-espresso.com
Made inOEM Handmade page: all espresso machines other than the GO and PRO 300 are made at the headquarters near Heidelberg Germany Sourcedprofitec-espresso.com

Not published Cup clearance, Portafilter, Steam wand, Current, Heating element, Phase, NSF listed, ENERGY STAR, Output, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.

What the sources say

  • Manufactured at Profitec headquarters in Germany (Handmade page: all machines except GO and PRO 300) profitec-espresso.com

More from Profitec

Every Profitec model