KINGrinder · Grinder · Home
KINGrinder P1
A P-series travel grinder sharing the P0's 38 mm burrs and 30-click internal adjustment. KINGrinder's support form lists it as discontinued.
Hand38 mm conical burrs
- Status
- Discontinued
Record coverage 40%
6 sourced4 derived13 not published
Specification
Burrs
| Field | Value | Evidence |
|---|---|---|
| Burr geometryhand grinder with a conical burr shown in the OEM comparison chart; geometry not written out | Conical | Derivedkingrinder.com |
| Burr diameterOEM comparison chart: Burr Size 38mm | 38mm 1.5 in | Sourcedkingrinder.com |
| Burr materialOEM comparison chart: Stainless Steel Burr | Steel | Sourcedkingrinder.com |
| Grind rangeOEM grind-setting chart for P models starts at Fine/Medium-Fine (no Extra Fine range listed) | Filter | Derivedkingrinder.com |
Dosing and adjustment
| Field | Value | Evidence |
|---|---|---|
| Type | Hand | Sourcedkingrinder.com |
| Dosinghand grinder: manual crank | Manual | Derivedkingrinder.com |
| Single dosinghand grinder: inherently single dose | Yes | Derivedkingrinder.com |
| HopperOEM comparison chart: Hopper Volume 20~25g | 25g 0.88 oz | Sourcedkingrinder.com |
| AdjustmentOEM: interior adjustment, 30 clicks per round, 33.33 microns per click | Stepped | Sourcedkingrinder.com |
Dimensions
| Field | Value | Evidence |
|---|---|---|
| WeightOEM comparison chart: 330g | 0.33kg 0.7 lb | Sourcedkingrinder.com |
Not published Burr speed, Steps, Retention, Width, Depth, Height, Voltage, Power, Noise, Daily output, NSF listed, Made in, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
