KINGrinder · Grinder · Home
KINGrinder K5
A K-series grinder with 48 mm stainless burrs and a 40-click interior dial. It is absent from the current support form, so its status is unclear.
Hand48 mm conical burrs
- Status
- Production status not published
Record coverage 40%
6 sourced4 derived13 not published
Specification
Burrs
| Field | Value | Evidence |
|---|---|---|
| Burr geometryhand grinder with a conical burr shown in the OEM comparison chart; geometry not written out | Conical | Derivedkingrinder.com |
| Burr diameterOEM comparison chart: Burr Size 48mm | 48mm 1.9 in | Sourcedkingrinder.com |
| Burr materialOEM comparison chart: Stainless Steel Burr | Steel | Sourcedkingrinder.com |
| Grind rangeOEM grind-setting chart gives click ranges from Extra Fine to Coarse (K7 manual: Turkish coffee through French Press) | Turkish to French press | Derivedkingrinder.com |
Dosing and adjustment
| Field | Value | Evidence |
|---|---|---|
| Type | Hand | Sourcedkingrinder.com |
| Dosinghand grinder: manual crank | Manual | Derivedkingrinder.com |
| Single dosinghand grinder: inherently single dose | Yes | Derivedkingrinder.com |
| HopperOEM comparison chart: Hopper Volume 20~25g | 25g 0.88 oz | Sourcedkingrinder.com |
| AdjustmentOEM: interior adjustment, 40 clicks per round, 18 microns per click | Stepped | Sourcedkingrinder.com |
Dimensions
| Field | Value | Evidence |
|---|---|---|
| WeightOEM comparison chart: 595g | 0.60kg 1.3 lb | Sourcedkingrinder.com |
Not published Burr speed, Steps, Retention, Width, Depth, Height, Voltage, Power, Noise, Daily output, NSF listed, Made in, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
