Eureka · Grinder · Commercial
Eureka Olympus KR E
The Eureka Olympus KR E is a slow-turning conical on-demand grinder with an epicycloidal reduction gear. It uses 68 mm conical burrs and is aimed at cafes and shops. The 1.6 kg hopper is sized for continuous service.
Commercial espresso68 mm conical burrs
- Status
- In production
Record coverage 56%
11 sourced3 derived9 not published
Specification
Burrs
| Field | Value | Evidence |
|---|---|---|
| Burr geometry | Conical | Sourcedeureka.co.it |
| Burr diameterOEM lists the conical set as 'E13/68'; 68 mm taken as the outer burr diameter | 68mm 2.7 in | Derivedeureka.co.it |
| Burr materialOEM: Hardened steel | Hardened steel | Sourcedeureka.co.it |
| Burr speed | 330rpm | Sourcedeureka.co.it |
Dosing and adjustment
| Field | Value | Evidence |
|---|---|---|
| TypeOEM category: commercial grinders (eureka 1920 range) | Commercial espresso | Sourcedeureka.co.it |
| DosingOEM program type: Electronic; Eureka groups its non-weighing electronic grinders as grind-by-time | Timed | Derivedeureka.co.it |
| Single dosingOEM lists a 1600 g bean hopper and no single-dose claim | No | Derivedeureka.co.it |
| HopperOEM: 1,6 kg | 1,600g 56.4 oz | Sourcedeureka.co.it |
| AdjustmentOEM: Stepless Micrometric Regulation System | Stepless | Sourcedeureka.co.it |
Dimensions
| Field | Value | Evidence |
|---|---|---|
| Width | 240mm 9.4 in | Sourcedeureka.co.it |
| Depth | 275mm 10.8 in | Sourcedeureka.co.it |
| Height | 637mm 25.1 in | Sourcedeureka.co.it |
| Weight | 16kg 35 lb | Sourcedeureka.co.it |
Electrical
| Field | Value | Evidence |
|---|---|---|
| PowerOEM: power absorbed | 900W | Sourcedeureka.co.it |
Not published Grind range, Steps, Retention, Voltage, Noise, Daily output, NSF listed, Made in, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
