1Zpresso · Grinder · Home
1Zpresso JX-Pro
A J-series grinder sharing the JX burr but with a 40-click top dial at 12.5 microns so it can dial in espresso as well as pour-over. Described on the J Series page but absent from the OEM store.
Hand48 mm conical burrs
- Status
- Production status not published
- Also known as
- JX-Pro S
Record coverage 36%
7 sourced2 derived14 not published
Specification
Burrs
| Field | Value | Evidence |
|---|---|---|
| Burr geometryOEM: shares the 48mm JX burr | Conical | Sourced1zpresso.coffee |
| Burr diameterOEM: shares the 48mm JX burr | 48mm 1.9 in | Sourced1zpresso.coffee |
| Grind rangeOEM: suitable for both pour-over and espresso | All-purpose | Sourced1zpresso.coffee |
Dosing and adjustment
| Field | Value | Evidence |
|---|---|---|
| Type | Hand | Sourced1zpresso.coffee |
| Dosinghand grinder: manual crank | Manual | Derived1zpresso.coffee |
| Single dosinghand grinder: inherently single dose | Yes | Derived1zpresso.coffee |
| HopperOEM: 30-35 g | 35g 1.23 oz | Sourced1zpresso.coffee |
| Adjustment40 clicks per rotation, 12.5 microns per click | Stepped | Sourced1zpresso.coffee |
Dimensions
| Field | Value | Evidence |
|---|---|---|
| WeightOEM series table: 780 g | 0.78kg 1.7 lb | Sourced1zpresso.coffee |
Not published Burr material, Burr speed, Steps, Retention, Width, Depth, Height, Voltage, Power, Noise, Daily output, NSF listed, Made in, List price. No manufacturer page or sheet we can cite gives these; they are left empty rather than guessed.
